Confirm the selection, and reset the service indicator by pressing the ok. Press the up / buttons to confirm. Press the lower right button on the left side of your steering wheel, and again it will show the reason why the “check engine” light is on.
Turn The Ignition To Position 2.Immediately Press Knob To Left Of Speedometer Twice Within 1 Second.present Status For Days Or Distance Will Be Displayed.within 10 Seconds, Turn The.
Turn the ignition to position 1 (*). Press the ok button again when you are already on the confirm full service, and the cluster will show the oil grade. This is about 95% of.
Press The Scroll Forward Button Until Conf.
Select the oil grade you are using. Find the reset button on the left side of your. I am going to follow the tutorial and use a curb to lift my car towards the passenger side instead of using the pump method.
The Oil Type Menu Is Displayed.
/> w213 service b reset how to reset. Choose the oil grade you. For mercedes benz gls 550 years 2015, 2016, 2017 models the oil reset maintenance light system can also be reset as follows:
Step 1 Close All Doors, Gear To.
Reset “wrench” service light 1.) turn the key to the on position (do not start car) 2.) press trip reset button 3 times until service shows 3.) hold down reset button 4.) while. The service menu can be accessed via the instrument cluster and will allow you to check the battery voltage, display vin, turn off esp, and reset oil. Use the and buttons to select the oil used for the service.
